Skip links and keyboard navigation

Media Level III

Apprenticeship and traineeship details

Please refer to the Declaration Policy for the requirements relating to apprenticeships and traineeships.

Please refer to the Norfolk Island Policy for apprenticeships and traineeships on Norfolk Island.

Type:
Traineeship

Job summary:
This qualification reflects the role of individuals who use basic skills and knowledge for work in skilled assistant or skilled assistant operator roles in the screen, media and entertainment industries. It applies to work in interactive digital media, film and television, radio, lighting and sound, content creation and technical broadcasting environments.

The job roles that relate to this qualification may include editing assistant, assistant content creator, assistant sound technician, assistant audio visual technician, assistant radio producer, podcast producer, community radio producer, community radio presenter, junior animator, camera assistant and technical production assistant. Individuals usually work under direction, using some discretion and judgement, and may provide technical advice and support to a team.

Australian Standard Classification of Occupations:
VISUAL ARTS AND CRAFT PROFESSIONALS

Sub-industry:
VISUAL ARTS AND CRAFT PROFESSIONALS NEC

Available Contract Modes:
  • Full-time
  • The lodgment of a second training contract where one of the training contracts is full-time will be reviewed by the Department to determine if each of the parties to each training contract can meet their obligations. There must be a clear separation between the training and employment requirements for each training contract and must not be replicated through the one occupation only.

  • Part-time
  • Minimum of 15 hours per week over each 4 week period throughout duration of apprenticeship/traineeship.

  • Casual NOT PERMITTED in Queensland
  • School-based
  • 7.5 hours per week of paid employment. This may be averaged over a 3 month period.

    Over the period of a year, the employer must provide at a minimum the equivalent of 375 hours (50 days) of paid employment.


    For a school-based trainee to be eligible to complete in this traineeship they must have met the minimum paid employment requirement as outlined below:
    - 12 month full time nominal completion duration - 50 days minimum (375 hours)
    Note: Each school-based traineeship has minimum paid employment requirements that are unique to the traineeship. Please refer to each traineeship in QTIS for further information.


Apprentices/trainees with a disability are entitled to work less than 15 hours per week when averaged over a 4 week cycle. They must be a holder of a disability pension and Pension concession card to be approved.

Other requirements for school-based:
School-based requirements
Students not enrolled in years 10, 11 or 12 may be eligible to enter a SAT provided there are exceptional circumstances warranting consideration and all other entry requirements are met, including being of an age where it is legal to undertake paid employment.

Before a student not in years 10, 11 or 12 commences a SAT, a business case supporting the arrangements must be provided to and approved by the Department of Trade, Employment and Training (DTET).

Delivery of training to school-based trainees
Limits have been imposed on the amount of institutional training which may be delivered to school-based apprentices, based on the nominal term of a full time training contract. This restriction does not apply to school-based traineeships.

Traineeship Probation/Duration Details:
All apprenticeships have a nominal term - this is the timeframe that is on the Traineeship training contract.

Mode Start Date End Date Probation Period (days) Nominal Term (months)
Full-time 01/11/2021 60 12

Minimum education standard:
Nil

Minimum entry age:
The Child Employment Act states that the minimum age for apprentices and trainees is 13 years of age, unless otherwise stated.

Entry Requirements:
Students not enrolled in years 10, 11 or 12 may be eligible to enter a SAT.

As a general rule, only Australian citizens and New Zealand citizens who have entered Australia on a valid passport have unrestricted rights to employment in Australia.

Visa holders may engage in apprenticeships or traineeships provided their work rights allows this, based on information and advice provided by the Australian Government.

Supervision requirements
Please refer to the Declaration policy, table 15 for the requirements on supervision.

Modified supervision arrangements available: NO

Employers are required to provide, or arrange to provide the facilities, range of work, supervision and training as detailed in the training plan.

Qualified person for traineeships
1. A person who has satisfactorily completed a traineeship in the trainee's calling, and is the holder of a completion certificate issued under an Act, or
2. A person who holds a certificate of recognition issued under an Act, certifying the person has the necessary skills and knowledge in the calling, or
3. A tradesperson in the trainee's calling, as defined under a specific industrial instrument, or
4. A person who holds a relevant qualification in the traineeship calling, or
5. A person individually, or persons collectively, who has/have documented competence (achieved through an RPL or training pathway) or demonstrated competence in all the competencies the employer is required to provide training for under the trainee's training plan (note - cannot be a person or persons currently undertaking the same traineeship), or
6. A person undertaking a traineeship, at a higher level than the trainee's, whose traineeship incorporates supervisory or coordinating skills and who has documented competence (achieved through an RPL or training pathway) in at least one of the competencies the employer is required to provide to the trainee under the training plan and who is supervised by a person who qualifies under (1), and/or (4) and/or (5).

And, where a worker is required to have a licence to practice the calling/occupation, the qualified person holds a current workers licence.

Adequate supervision of apprentices and trainees cannot solely be provided from an offsite location by electronic means. Electronic means include, but are not limited to, telephones, radios and webcams.

The level of supervision will normally range between direct, general and broad as per the below guidelines:
- Direct - Close monitoring of work ensuring understanding and identifying potential risks and/or hazards
- General - Occasional monitoring to ensure progress is occurring
- Broad - Quality checking of completed tasks.

Licensing requirements -
National Standard for Licensing Persons Performing High Risk Work:
The National Standard for Licensing Persons Performing High Risk Work applies to persons performing dogging and rigging work. Completion of the following units is required for certification at either basic, intermediate or advanced levels:
- CPCCLDG3001 Licence to perform dogging
- CPCCLRG3001 Licence to perform rigging basic level
- CPCCLRG3002 Licence to perform rigging intermediate level
- CPCCLRG4001 Licence to perform rigging advanced level.

National Code of Practice for Induction for Construction Work:
Sets and staging for some performances or events may fall within the definition of construction work. If so, people entering the construction site are required to complete the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (Australian Safety Compensation Council, May 2007). Achievement of the unit CPCCWHS1001 Prepare to work safely in the construction industry from the CPC Construction, Plumbing and Services Training Package fulfils this requirement.

Units of Competency in Qualification:
Some individual units of competency may have their own licensing, legislative, regulatory or certification requirements. Users must check individual units of competency for licensing, legislative, regulatory or certification requirements relevant to that unit.

Status:
Current

Qld declaration date:
20/10/2021

Implementation date:
01/11/2021


Qualification details

Name:
Certificate III in Screen and Media

Qualification code:
CUA31020

Qualification content:
Click here for more details

Training package:
CUA - Creative Arts and Culture Training Package - CUA

Status:
Current


Queensland User Choice program funding details

The Queensland User Choice program funds Skills Assure suppliers (RTOs) for the provision of services to eligible apprentices and trainees.
For more information, please visit User Choice in Queensland.

Funded under the User Choice Program:
Yes

Full Price - Priority Population Groups:
$4,330.00

Queensland Government Contribution - All Other Students including SATs:
$4,330.00

Number of funded units of competency:
11

Priority:
1

Funding restrictions:

  • Note that Queensland Government Contribution may be the same as Full Price, depending on qualification priority and thin market status

Funding not available for new commencements from:
N/A

User Choice Training Catalogue Item:
22634

DELTA Qualification ID:
3941

Industry training group:
Arts & Entertainment - Entertainment


Industrial relations details

Since 1 January 2010, all private sector employers and employees in Queensland, including apprentices and trainees, have their wages and conditions of employment covered by the Fair Work Act 2009 and modern awards. This legislation is administered by the Commonwealth Government Fair Work Ombudsman's office. https://www.fairwork.gov.au/pay/minimum-wages/apprentice-and-trainee-pay-rates.

Apprentices and trainees are considered employees and may receive entitlements the same as other employees such as: annual leave, sick leave, public holidays, superannuation, workers compensation and allowances. Apprentices and trainees must also receive a pay slip to cover full details of the pay for each pay period. Pay slips have to be given to an employee (including apprentices and trainees) within 1 working day of pay day and be either in electronic form or paper hard copy.

Parties should make enquiries with the Fair Work Ombudsman on Ph: 13 13 94 or at http://www.fairwork.gov.au to determine the correct industrial instrument and entitlements.

When employment is ceasing the employer or the employee (apprentice/trainee) must provide the appropriate notice periods as per the relevant award or registered workplace agreement. A notice period is the length of time that an employer or employee (apprentice/trainee) has to give to end employment. Additional information about notice periods can be found at: http://www.fairwork.gov.au/ending-employment/notice-and-final-pay.

Unfair dismissal is when an employee (apprentice/trainee) is dismissed from their job in a harsh, unjust or unreasonable manner. Additional information about unfair dismissal can be found at: http://www.fairwork.gov.au/ending-employment/unfair-dismissal.

Public sector and local government workers in Queensland remain under the state industrial relations system. Additional information about wages and conditions of employment for employees (apprentices/trainees employed by state or local government) can be found at: https://www.forgov.qld.gov.au/working-in-the-public-service/directives-awards-and-legislation/pay-awards-and-agreements.